|
Wüsthof 12-Inch Sharpening Steel | 
 enlarge | Brand: Wüsthof
Category: Kitchen
List Price: $70.00
Buy New: $49.99
You Save: $20.01 (29%)
New (3) from $49.99
Rating:  1 reviews
Sales Rank: 170658
Shipping Weight (lbs): 1
Dimensions (in): 16 x 2 x 2
MPN: 4474/32
Model: 4474/32
EAN: 4002293447421
ASIN: B00012F2M8
Promotion: Get free shipping on this item when you spend $79.00 or more on Qualifying Items offered by CHEFS Catalog. Terms and Conditions
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | 12-Inch sharpening steel | | • | Magnetic steel that attracts metal fibers | | • | Slip-resistant plastic handle fits comfortably in the hand | | • | Loop on the handle for hanging | | • | Wipe clean with a damp cloth after each sharpening session |
|
| Editorial Reviews:
Product Description
Essential to keep your knives in top condition, periodically passing your knives along a honing steel realigns the "teeth" along the cutting edge of the blade for optimum cutting performance. The steel and base plate are hard chromium plated.
With constant use, any knife edge will lose its "bite". The edge consists of tiny teeth which must be restored and re-aligned for maximum cutting performance.
To sharpen a knife using a honing steel:.
1. Hold the steel in your left hand and place the knife heel with your right hand on the upper end of the steel.
2. With the edge on the steel, tilt the back of the blade about 1/4" away from the steel. The resulting angle should be 20 .
3. Maintaining this angle, move the blade in an arching motion from heel to tip over the front steel surface toward the guard, as if you were to slice into the steel, with very little pressure. Repeat this step 6 - 8 times.
4. Repeat step 3 over the back steel surface 6 - 8 times.
5. Now alternate each stroke on the front and back steel surface to remove any burrs.
6. Your knife edge should be perfectly sharp again. After lengthy use, it may become necessary to have your knife's geometry restored by a professional grinding service.
|
| Customer Reviews:
This steel changed my life. April 7, 2008
Joshua G. Feldman (New York)
2 out of 2 found this review helpful
Initially I didn't understand the steel - and what honing was. Even after I figured it out I didn't see the point until I ran into this incredible steel. Unlike the cheap little ones included with sets, this steel has a big enough diameter, long enough length, and incredible machining on the grooves to really effectively hone every time out. It also has an awesome molded handle and big chunky hanging ring (which you might need because a 12" steel will stick out of most blocks).
Why use a steel to hone? Stainless steel is ductile and the edge of a knife is a place where the steel is very very thin. In use the very edge will bend or fold over microscopically. Then, then next cut you make will be on what will be on the fold - rather than on the sharp edge. These micro folds can be straightened out by the use of a Steel - a process called "honing". Honing involves wiping the blade across a hard steel rod which has a large number of tiny parallel grooves cut in it. When the wiping motion is done like carving - at the angle the edge is ground - the steel literally unfolds the edge and gives the fine edge a micro ripple. In this way, steeling a sharp knife that has recently gone dull is like magic - full sharpness is immediately restored. Over time, however, all this cutting and steeling will actually wear metal away from the edge, or some folds will become permanent and the edge itself will become dull and the knife will need to be sharpened.
"Steeling", or "honing" is emphatically NOT "sharpening". These are two fundamentally different knife care techniques. In short, the steel restores the edge as much as it can, without removing metal; and the sharpening actually removes metal to grind a new edge. Sharpening is done on an abrasive stone or a metal plate onto which diamond or other abrasive has been adhered. Sharpening actually removes metal - so it actually reduces the life of the knife to a certain extent.
The big message here is to steel frequently (ideally every single time you use the knife - right before you use it) and to sharpen infrequently (no more than once or twice a year). Chefs are always depicted holding the steel in the air pointing up and flicking the knife rapidly over it. In practice it is almost impossible to properly steel a knife this way. Hold the steel facing down with the tip pressed into your cutting board and cut straight down with your knife at the grind angle (10-15 degrees for Asian style and 20-25 degrees for Western) while the steel is stabilized rock solid. This way the steel is held rigidly vertical and the angle is easy to see. When you get the angle right you can feel the edge "bite" a little into the steel.
Since you should be using the steel frequently, I highly recommend you get the best steel you can. There are some very real differences in the machining of the grooves. You should also be aware that "diamond" or "sharpening" steels are for sharpening, NOT honing. The other big factor in choosing a steel is length. Get a big long one. Theoretically your steel should be 1-2" longer than your longest knife - so a 9" steel ought to be fine if you have an 8" knife. In practice, the longer the steel, the more comfortable and easy it is to steel. I've tried honing an 8" knife with a 9" steel and you have to do two passes to get one stroke. Henkel's 12" steel is a best seller and a great value: J.A. Henckels Twin Pro S 12-Inch Honing Steel. I, personally, went with Wusthof's, which is much more expensive but is utterly exquisite and a dynamite pleasure to use: Wusthof 12 in. Sharpening Steel. Be aware that these big long 12" steels will stick out of most knife blocks. The excellent functionality is well worth the little bit of trouble of it sticking out a bit.
FYI - the item reviewed is Wusthof's 4474 - the 12" steel with modern square handle. 4474 is the item being sold here - the photograph was correct until late May 2008, when the photograph of 4471 (a 12" Wusthof steel with an old fashioned beehive handle) was substituted. The 4471 is also excellent - with a virtually identical steel. However I find the handle of 4474 more comfortable. Be aware that the photograph is not of the item on sale. To see 4474 link to http://www.wusthof.com/en/database3.asp?id=308
|
|
|
|
|
Manor Stores, LLC Shopping Network
|
|
Baby Manor Online Baby Store |
baby shower gift, baby gift basket, maternity pillow, baby shower favor, baby shower party favor, baby shower decoration, baby shower invitation, baby phat clothing, toy and baby, baby item, newborn baby product, baby name book, child bedding |
|
Beauty Supply Store |
Beauty supply store, health and beauty product, bath beauty, beauty product, beauty personal, mac cosmetic, cosmetic retailer, man jewelry |
|
Manor Stores, LLC Shopping Network
|
|
|
|
| |
